Table of Contents
Advertisement
To create a group from the list, first enter the group name and then select from the
available interfaces on the list.
Automatically Add Clients With the Following DHCP Vendor IDs:
Add support to automatically map LAN interfaces including Wireless and USB to
PVC's using DHCP vendor ID (option 60). The local DHCP server will decline and
send the requests to a remote DHCP server by mapping the appropriate LAN
interface. This will be turned on when PortMapping is enabled.
There are 4 PVCs (0/33, 0/36, 0/37, 0/38). 0/33 is for PPPoE and the others are for
IP setup-box (video).
The Lan interfaces are ETH1, ETH2, ETH3, ETH4, Wireless and USB.
Port mapping configuration are:
1. Default : ENET1, ENET2, ENET3, ENET4, Wireless, Wireless_Guest and USB.
2. Video: nas_0_36, nas_0_37 and nas_0_38. The DHCP vendor ID is "Video".
The CPE's dhcp server is running on "Default". And ISP's dhcp server is running on
PVC 0/36. It is for setup-box use only.
On the LAN side, PC can get IP address from CPE's dhcp server and access internet
via PPPoE (0/33).
79
Advertisement
Table of Contents
