Table of Contents
Advertisement
IPSec Connection Name
Remote IPSec Gateway Address
(IP or Domain Name)
Tunnel access from local IP
addresses
IP Address for VPN
Tunnel access from remote IP
addresses
IP Address for VPN
Key Exchange Method
Authentication Method
Pre-Shared Key
Perfect Forward Secrecy
Advanced IKE Settings
User-defined label
The IP address of remote tunnel Gateway,
and you can use numeric address and
domain name
It chooses methods that specify the
acceptable host IP on the local side. It has
single and subnet.
If you choose "single", please entry the host
IP address for VPN. If you choose "subnet",
please entry the subnet information for VPN.
It chooses methods that specify the
acceptable host IP on the remote side. It
has single and subnet.
If you choose "single", please input the host
IP address for VPN. If you choose "subnet",
please input the subnet information for VPN.
It has two modes. One is auto and the other
is manual.
It has either pre-shared key or x.509.
Input Pre-shared key
Enable/disable the method that is Perfect
Forward Secrecy.
On IPSec Auto mode, you need to choose
the setting of two phases. Click the button
then choose which modes, Encryption
Algorithm, Integrity Algorithm, Select
Diffie-Hellman Group for Key Exchange, key
time on different phases.
82
Advertisement
Table of Contents
