Table of Contents
Advertisement
Choosing WPA-PSK, you must enter WPA Pre-Shared Key and
Group Rekey Interval.
WEP
It specifies that a network key is used to encrypt the data is sent over
Encryption
the network. When this checkbox is selected, it enables data
encryption and prompts the Encryption Strength drop-down menu.
Data Encryption (WEP Enabled) and Network Authentication use the
same key.
Encryption
A session's key strength is proportional to the number of binary bits
strength
comprising the session key file. This means that session keys with a
greater number of bits have a greater degree of security, and are
considerably more difficult to forcibly decode. This drop-down
menu sets either a 64 8-bit (5-ASCII character or 10-hexadecimal
character) or 128 8-bit (13-ASCII character or 26-hexadecimal
character) key.
If you set a minimum 128-bit key strength, users attempting to
establish a secure communications channel with your server must
use a browser capable of communicating with a 128-bit session key.
The Encryption Strength settings do not display unless the network
Authentication (shared Mode) check box is selected.
94
Advertisement
Table of Contents
