Table of Contents
Advertisement
en | Troubleshooting and FAQ
56
11
Troubleshooting and FAQ
11.1
Troubleshooting
Unpredictable battery
consumption.
Receiver will not turn
on.
Transmitter will not
turn on.
2021.06 | 3 | F.01U.362.808
Poor quality or stale
batteries.
Power supply not plugged in.
DC power distribution cable
from AASP splitter not
properly connected (if used).
AC mains circuit is off.
Power button may be
damaged.
Dead batteries.
Battery polarity reversed.
Power button may be
damaged.
Installation manual
RE3 UHF Wireless
Fresh battery life should be >8
hours. Use fresh, good quality
alkaline batteries for longest
battery life. Transmitter output
power will affect battery
consumption as high power
setting uses more current.
Ensure power supply is
plugged into AC power, and its
DC connector is fully plugged
into receiver DC input jack.
Ensure DC distribution cable is
fully plugged into receiver DC
input jack and the other end is
fully plugged into an AASP DC
output jack.
Ensure AC circuit is live by
testing another AC powered
item. If necessary, locate and
reset circuit breaker.
The RE3 receiver power button
is robust and durable, and is
unlikely to fail. If other listed
resolutions do not solve the
problem contact your local
Electro-Voice service center.
Replace with fresh, high-quality
alkaline batteries.
Ensure battery + and - ends are
in contact with the like-marked
battery compartment contacts.
RE3 transmitter power buttons
are robust and durable, and are
unlikely to fail. If properly-
inserted and known-to-be-fresh
batteries will still not turn on
transmitter, contact your local
Electro-Voice service center.
Electro-Voice
Advertisement
Table of Contents
