Electro-Voice RE3-BP0L-T Instruction Manual page 37

RE3 UHF Wireless
Entering the menus is not possible when Keylock is on. Keylock must be turned off to
access menus.
1 Press and hold SET for two seconds to enter Keylock screen.
2 The display shows the setting of ON.
3 Press the▼ button to toggle from ON to OFF.
Press SET to save changes. The display returns to the home
4
screen where the
7.3.15 Adjusting display options: contrast and brightness
Adjustments to the display contrast and brightness are made in menu item a, Display
Options.
Press the ▼ button to scroll down to Display Options from
1 the main menu. Select by pressing SET to enter the Display
Options screen where the screen shows the current settings.
Contrast setting is highlighted. To make any changes, press
the ▲ button to assign higher contrast value, or press the ▼
2 button to assign lower contrast value. Press set to move to
brightness.
Current brightness value is highlighted. To make any
changes, press the ▲ button to assign higher brightness
3
value, or press the ▼ button to assign lower brightness
value.
Press SET to save changes. The display then returns to the
4
main menu.
5 Press SET to save. The display returns to the main menu.
Either scroll ▼down to Exit and press SET, or briefly press
6
SYNC on the receiver front panel to return to the home
Electro-Voice
icon no longer appears.
Installation manual
RE3-RX receiver | en 37
2021.06 | 03 | F.01U.362.808