Electro-Voice RE3-BP0L-T Instruction Manual page 29

RE3 UHF Wireless
The current assigned group is displayed. Prepare to scan
that group, or scroll through other groups using ▲ or ▼.
Select the group to scan by pressing SET. The scan of that
3
group begins. When the scan is complete, the highlight box
advances to channel, and the first clear channel in that group
appears.
Either press SET to save the channel displayed and exit, or
press ▲ or ▼ to scroll through to locate the next open
channel. A brief scan occurs while locating the next clear
4 channel. Some channel numbers may be skipped because
they were not clear at the time of the scan. Press SET to
save. This selects that group and channel the set will
operate on.
5 This returns to Current Group on the scan menu.
Either scroll ▼down to Exit and press SET, or briefly press
SYNC on the receiver front panel to return to the home
6
screen. The selected Group/Channel and associated
Frequency displays on the home screen.
7.3.6 Return
Selecting Return in the Scan menu returns to the main menu.
While in the Scan menu, press the ▼ button to scroll down to
1
Return. Press SET.
2 The screen returns to the main menu.
Either scroll ▼down to Exit and press SET, or briefly press
3 SYNC on the receiver front panel to return to the home
screen.
4 Home screen
Electro-Voice Installation manual
RE3-RX receiver | en 29
OR
OR
.
2021.06 | 03 | F.01U.362.808