Table of Contents
Advertisement
en | RE3-RX receiver
28
During a session, you can return to the result list to select a different group and channel, or
just a different channel within the same group.
1
Enter the main menu and select Scan by pressing SET.
Press ▼ to scroll down to Result List. Press SET to enter
2
Result List.
Scroll through groups using the ▲ or ▼ buttons noting open
channel quantity per group. Select either the same previous
3
group or a new group by pressing SET. This advances to the
channel and CH # highlights.
Press the ▲ or ▼ button to scroll through open channels.
Note that some channel numbers may be skipped because
4
they were not clear at the time of the scan.
Press SET on CH number.
This selects that group and channel the set will operate on.
5
This also returns to Result List on the scan menu.
Either scroll ▼down to Exit and press SET, or briefly press
SYNC on the receiver front panel to escape to the home
6
screen. The selected Group/Channel and associated
Frequency displays on the home screen.
7.3.5
Scanning current group
The current assigned group, or a particular selected group can be scanned individually.
This process will locate clear channels within that group individually.
1
Enter the main menu and select Scan by pressing SET.
Press the ▼ button to scroll down to Current Group. Press
2
SET to enter Result List.
2021.06 | 3 | F.01U.362.808
Installation manual
RE3 UHF Wireless
OR
Electro-Voice
Advertisement
Table of Contents
