Table of Contents
Advertisement
RE3 UHF Wireless
Function
Frequency setup
The three digits to the
left of the decimal are
in millions (MHz).
The three digits to the
right of the decimal
are in thousands
(kHz).
Group / Channel setup
The digit to the left of
the (-) is the group
number
The digit(s) to the right
of the (-) is the
channel number
Sensitivity setup
Indication on display:
SEnSit
Displays current
sensitivity setting
value
Electro-Voice
# of SET
button
presses
1
Millions
2
Thousands
To save changes:
Press SET while thousands is flashing.
StorE is displayed / returns to home screen.
3
G: #
4
CH: #
To save changes:
Press SET while channel number is flashing.
StorE is displayed / returns to home screen.
5
To save changes:
Press SET while displaying sensitivity numeric
value.
SENSIT is displayed briefly / returns to home
screen.
Installation manual
RE3-BPT bodypack transmitter | en
Result
▲ increases frequency in
increments of 1 MHz per press.
▼decreases frequency in
increments of 1 MHz per press.
▲ increases frequency in
increments of 25 kHz per press.
▼decreases frequency in
increments of 25 kHz per press.
▲ increases the group number (1-8)
in single digit increments.
▼decreases the group number (1-8)
in single digit increments.
▲ increases the channel number
(up to 22) in single digit increments.
▼decreases the channel number
(up to 22) in increments of one.
▲ increases the numeric value in
increments of 3dB.
▼ decreases the numeric value in
increments of 3dB.
Setting options (low to high): -15dB,
-12dB, -9dB, -6dB, -3dB, 0dB, 3dB,
6dB, 9dB, 12dB, 15dB.
2021.06 | 03 | F.01U.362.808
51
Advertisement
Table of Contents
