Table of Contents
Advertisement
RE3 UHF Wireless
7.3.16
System reset
Resetting the receiver in menu item b, Reset restores all settings to factory default. Be very
sure you want to do this as all custom settings will be erased.
Press the ▼ button to scroll down to Reset from the main
1
menu. Select by pressing SET to enter the Reset screen.
The reset screen displays the warning message shown. No is
2
highlighted as the default option.
Press ▲ to toggle to Yes.
3
(NOTE: If Yes is highlighted and you wish to change to No,
press the ▼ button to select and highlight No).
Press SET when you are sure of your choice.
If No is selected, Cancel is displayed and the screen returns
to the main menu.
4
If Yes is selected, dialogs of " Resetting" and " Reboot"
consecutively appear. The receiver restarts with factory
default settings. The display then shows the home screen
with G:1 and CH:1 as default.
7.3.17
Exit
Select item c, Exit to return to home screen.
From the main menu, press the ▼ button to scroll down to
1
Exit. Press SET.
The home screen displays.
2
Electro-Voice
Installation manual
RE3-RX receiver | en
39
2021.06 | 03 | F.01U.362.808
Advertisement
Table of Contents
