Electro-Voice RE3-BP0L-T Instruction Manual page 26

Uhf wireless
Table of Contents

Advertisement

en | RE3-RX receiver
26
2. Frequency
3. Group/Channel
4. Squelch
5. Mic Config
6. Volume
7. RX output level
8. Antenna Power
9. Keylock
a. Display option
b. Reset
c. Exit
7.3.3
Scanning for open channels
Three methods are available. 1) Briefly press the SCAN button on the front panel to open
the Scan submenu (arrive at step 1 below). 2) Press and hold SCAN button on the front
panel for 3 seconds to enter " Scan All Groups" dialog (arrive at step 2 below). 3) Select 1
from the main menu to open Scan submenu.
1
Select 1. All Groups and press SET to begin scan process.
2021.06 | 3 | F.01U.362.808
Submenu selection to access manual control in setting frequency.
Selecting opens frequency submenu.
Submenu selection to access manual control in setting group and
channel. Selecting opens Group/Channel submenu.
Submenu selection to access squelch setting to control background
radio noise. Selecting opens squelch submenu. Factory default is 0
(zero).
Submenu selection to access a variety of microphone transmitter
parameters, which transfer to the transmitter during SYNC operation.
Selecting opens MicConfig submenu.
Submenu selection to access manual control of receiver output
volume. Selecting opens setup volume submenu.
Submenu selection to access manual control of receiver output level.
Selecting opens output level submenu where MIC level or LINE level
are options.
Submenu selection to access manual control of receiver antenna
booster feed voltage. Selecting opens Antenna Power submenu where
ON and OFF are options. Factory default is ON.
Submenu selection to access manual control of Keylock feature
operating status. Selecting opens Keylock where ON and OFF are
options. Factory default is OFF.
Submenu selection to access manual control of receiver display
characteristics. Selecting opens Display Options submenu where
contrast and brightness are controlled. Factory defaults are 4.
Submenu selection to access a manual receiver reset to factory
default settings. Selecting opens reset submenu.
Returns to home screen.
Installation manual
RE3 UHF Wireless
Electro-Voice

Advertisement

Table of Contents
loading

Table of Contents