Electro-Voice RE3-BP0L-T Instruction Manual page 46

en | RE3-HHT handheld transmitter
46
RF Output Power
setup
Indication on display:
RF PWR
NOTE: Does not
appear in 8M Band
menu routine
Auto Off setup
Indication on display:
AUToOF
Assigns a time period
for the transmitter to
automatically turn off
once mute is engaged
to conserve battery
life.
Key Lock setup
Indication on display:
Loc
Keylock prevents
unwanted tampering
with, or changes to
transmitter parameter
settings. It can be set
up locally on the
transmitter, or synced
from the receiver in
the receiver's Mic
Config settings.
2021.06 | 3 | F.01U.362.808
6
To save changes:
Press SET while displaying RF power value.
SAVE is displayed briefly / returns to home screen.
7
To save changes:
Press SET while displaying AutoOFF value.
SAVE is displayed briefly / returns to home screen.
To lock the
transmitter
8 OR
To unlock
the
transmitter
Installation manual
▲changes low to high.
▼changes high to low.
High (RFPHI) will be displayed
indicating high RF power.
Low (RFPLo) will be displayed
indicating low RF power.
Use ▲ or ▼ to navigate
Options are: Off, 1 minute, 10
minutes, and 30 minutes.
Displayed as OFF, 1, 10, or 30.
This icon will be displayed
indicating an AutoOff timer is set
and will begin flashing once
transmitter is put into MUTE.
Upon entering the Loc screen,
pressing ▲ changes OFF to On.
is displayed indicating Keylock is
on.
Press SET while displaying Loc On.
StorE is displayed / returns to home
screen.
While pressing and holding ▲,
press and hold SET for two
seconds to turn lock ON.
displayed and transmitter is locked.
To unlock, press and hold SET until
On begins flashing. Pressing ▼
toggles On to OFF.
Press SET while displaying
LocOFF.
StorE is displayed / returns to home
screen.
RE3 UHF Wireless
will be
Electro-Voice