Table of Contents
Advertisement
3-8
Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 3-3
Using manufactured cables and accessories
ADP-5037
ADRP-5037
KCPI-PIO96
J102
Table 3-2
Description of manufactured cables and accessories
Cable/accessory
Description
ADP-5037
PIO-96 to 37-pin conversion cable.
CACC-2000
Cable, 24 in, KPCI-PIO96 to STA-50, STP-50, ERB-24 or SSIO-24.
ERA-01
8-channel SPDT relay output assembly. Requires C1800 and
ADRP-5037 cables.
ERB-24
24-channel DPDT relay output board. Requires CACC-2000 cable.
SRA-01
8-channel solid state I/O module accessory. Requires C1800 and ADRP-
5037 cables.
SSIO-24
24-channel solid state I/O module board. Requires CACC-2000 cable.
STA-50
Universal 50-pin screw terminal board. Requires CACC-2000 cable.
STP-50
Screw terminal panel with 50-pin male header. Requires CACC-2000 cable.
The standard CACC-2000 cable is only 24 inches (two feet) long, and up to 7 inches of this length
is inside the computer after board installation. If the remaining length is too short for your
application, order a longer cable as part number CACC-20NN. The suffix NN is the additional
number of feet needed beyond the standard two foot length.
C-1800
SRA-01 OR ERA-01
CACC-2000
CACC-2000
J103
J104
J105
KPCI-PIO96 User's Manual
ERB-24 OR SSIO-24
STA-50
OR
STP-50
Advertisement
Table of Contents
