Emulate Alt+Keypad - Newland NLS-HR15-BT User Manual

Emulate ALT+Keypad

When Emulate ALT+Keypad is turned on, any character whose ASCII value is greater than or equal to 0x20 is sent over
the numeric keypad no matter which keyboard type is selected.
1. ALT Make
2. Enter the number corresponding to a desired character on the keypad.
3. ALT Break
After Emulate ALT+Keypad ON is selected, you need to choose the code page with which the barcodes were created and
to turn Unicode Encoding On or Off depending on the encoding used by the application software.
** Emulate ALT+Keypad OFF
Since sending a character involves multiple keystroke emulations, this method appears less efficient.
Supposing Emulate ALT+Keypad is ON, Unicode Encoding is Off, Code Page 1252 (West European
Latin) is selected, and Emulate Keypad with Leading Zero is Off, barcode data "AÐF" (65/208/70) is
sent as below:
"A" – "ALT Make" + "065" + "ALT Break"
"Ð" -- "ALT Make" + "208" + "ALT Break"
"F" -- "ALT Make" + "070" + "ALT Break"
69
Enter Setup
Emulate ALT+Keypad ON
** Exit Setup