Explanation Of Symbols - Barco Eonis MDRC-2122 BL User Manual

At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is af-
fected by absorption and reflection from structures, objects and people.
Recommended separation distance
The Eonis display is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer of the user of the Eonis display can help prevent electromagnetic interfer-
ence by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the Eonis display as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is af-
fected by absorption and reflection form structures, object and people.
7.5

Explanation of symbols

Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
5. For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter. Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
K5903049 EONIS 11/10/2016
Separation distance according to frequency of transmitter
5
150kHz to 80MHz
d=1.2√P
0.12
0.38
1.2
3.8
12
Indicates compliance with the Directive 93/42/EEC as Class I device
Indicates compliance with the Directive 93/42/EEC as Class II device
80MHz to 800MHz
d=1.2√P
0.12
0.38
1.2
3.8
12
7. Important information
800MHz to 2.5GHz
d=2.3√P
0.23
0.73
2.3
7.3
23
31