Clock And Date Setting; Changing The Operating Mode - OEG 650 001 330 Installation And Operating Instruction

Press clock and date button
for 4 s to set time and date.
Click the operating mode button
to select the desired operating mode.
The heat pump can control up to 5 diff erent operating modes.
(1) Cooling only
(2) Heating only
(3) DHW only
(4) Cooling and DHW
(5) Heating and DHW
When choosing the operating mode Cooling or Heating plus DHW, DHW has priority.
When choosing the operating mode DHW, the heat pump works only in DHW mode,
no cooling or heating.
The anti-legionella mode is an independent, automatic operating mode. If necessary,
you can modify the parameters individually.
If not required, please modify only parameter P14 to value 2.
Auto Temp. operating mode in 4.4.2.4 on page 66.
Multi-functional DC inverter air/water heat pump
65

Clock and date setting

Changing the
operating mode
GB
4.4.2.3
4.4.2.4