Installation; Selecting A Location; Unpacking - Fisher Scientific 650 Series Instruction Manual

Caution
Do not install closer than 6 inches
to a wall of combustible material.

Installation

Selecting a Location

Choose a location for the furnace, which will provide an
area of approximately four square feet (2 ft x 2 ft). The
bench or table selected must be capable of supporting at
least 60lbs for the Model 14, 90lbs for the Model 58 or
110lbs for the Model 126. Appropriate electrical power
must be available. Locate the furnace within three feet of
the power outlet so that no extension cord is required.
It is recommended that the site have facilities for venting
an accessory Exhaust Tube Assembly (Cat. No.10-490-
10) which is available for use with the furnace.
Alternatively, the furnace may be located in a fumehood if
samples are expected to produce toxic volatiles.

Unpacking

Fisher Isotemp Muffle Furnaces are shipped in a single
carton. After unpacking, locate each item shown in the list
below. Report any missing items, by name and part num-
ber, to your Fisher branch or representative. In the event
of shipping damage, retain the carton and packing materi-
al and file a claim with the final carrier.
Item
Furnace Assembly
Model 14
Model 14A
Model 58
Model 126
Hearth Plate
Shelf (Model 126 Only)
Instruction Manual
Warranty Card
120 V, 50/60 Hz
208/240V, 50/60 Hz
208/240 V, 50/60 Hz
208/240 V, 50/60 Hz
5