Replacing Cutter - MUTOH ValueJet VJ-628 Operation Manual

[9] Close the front cover.
[10]

Replacing cutter

When the cutter blade becomes dull, replace with a new cutter.
CAUTION
Procedure
[1]
Open the front cover.
[2]
[3]
[4]
[5]
Close the front cover.
Press!
• Do not push the knob of cutter or release suddenly.
Because there is a spring under the cutter, the cutter can jump out.
• Do not touch the cutter blade.
It may cause injury.
Short press the operation key on the operation panel.
• The carriage moves to the original position inside the front cover.
Move the cutter holder a little so that the cutter can be removed.
• While pushing down the cutter knob lightly, move the cutter holder
to your side.
Remove the cutter.
Attach a new cutter.
• Set the cutter for the cutter holder to be in the original position.

Replacing cutter

67