Cleaning Each Part; Head Cleaning - MUTOH ValueJet VJ-628 Operation Manual

Cleaning each part

3

Cleaning each part

To use this product always in its best condition, please clean periodically.

Head cleaning

When nozzle clogging is found in nozzle check, conduct head cleaning. Head cleaning consumes ink.
There are several cleaning modes in this product. Please use them accordingly based on your usage condition.
Short cleaning
Normal cleaning
Long cleaning
Little Charge
Important!
Comply strictly with the following when you performing "Little Charge".
If charging is interrupted, ink will be lost when charging is resumed.
• Do not open the Front cover.
• Do not use ink cartridges that have little ink remaining.
Steps for head cleaning
[1] Display the Printing Preferences screen of the printer driver.
"Displaying the Printing Preferences screen of printer driver" on page 10
[2]
58

Head cleaning

Consumes less ink than Normal cleaning.
Conduct nozzle check before and after printing, and use when nozzle clogging is found.
Consumes more ink than Normal cleaning. When nozzle clogging still occurs after Normal
cleaning, conduct Long cleaning.
Though much better cleaning results can be expected than Long cleaning, it consumes a
large amount of ink.
Click [Cleaning] in the [Utility] tab under the [Utility] tab.
• The "Head Cleaning" window opens.
The same can be also done with MSM.
Note