White maintenance settings
Sets up maintenance operation for metallic ink and white ink.
If you do not usually use metallic ink and white ink for regular printing, set to "Little" to curb metallic ink and white ink
consumption in standby status.
This menu is only available for 7 colors and 8 colors settings.
Procedure
[1]
Launch remote panel for the MSM.
"Launching/Displaying/Exiting MUTOH Status Monitor (MSM)" on page 11
[2]
Select the maintenance operation from [White Maintenance] menu on the [Advanced Setting] tab.
[White Maintenance] includes the following modes.
Normal:
Little
[3]
Click "Update".
• The setting value is applied to the printer.
Note
Metallic ink and white ink tend to settle or coagulate inside the print head or ink tubes.Therefore, the printer regularly discharges a small
amount of metallic ink and white ink to maintain the performance, even in standby status.
48
White maintenance settings
The printer performs metallic ink and white ink's maintenance operations at a regular
frequency. This is the default setting.
The printer performs fewer maintenance operations for the minimum metallic ink and
white ink.