Advanced Settings; Setting Auto Cut - MUTOH ValueJet VJ-628 Operation Manual

Advanced settings

2

Advanced settings

Settings in this product can be changed to match your usage.
Only a part of functions is introduced here.
For usage functions of software, please refer to help or manual of software.
"Displaying Help" on page 13

Setting auto cut

It can be set to cut media automatically, when printing is done.
Setup is done to match the width, thickness and material of media.
Note
Depending on media, cutting cannot be done. In such a case, cut manually.
Procedure
[1] Launch the remote panel of MSM.
"Displaying remote panel" on page 11
[2]
Select anything but [Off] in the [Media Initial] menu under the [Media Setting] tab.
[3] Select [Auto Cut] in the [Output Mode] menu under the [Advanced Setting] tab.
44

Setting auto cut