Cutting By Hand; Cutting Automatically - MUTOH ValueJet VJ-628 Operation Manual

Cutting by hand

For media that cannot be cut with the built-in cutter in the product, please cut following the next steps.
[1] Check printing is done.
[2]
[3]
Open the front cover, and cut the media with a commercial available cutter.
• Cut along the media cut groove.
Media cut groove
[4] Close the front cover.

Cutting automatically

In this product, a setup is possible to cut media automatically after printing is done. Refer to the setup methods described
below.
"Setting auto cut" on page 44
Feed the media to a position where print results can be cut.
"Forwarding/Rewinding media" on page 37

Cutting by hand

39