Maintenance; Chapter 12 Maintenance; Overview; What You Can Do In This Chapter - ZyXEL Communications NR2101 User Manual

12.1 Overview

Use the system screens to configure general NR2101 settings.

12.1.1 What You Can Do in this Chapter

• Use the Firmware Upgrade screen to upload new firmware to your NR2101
• Use the Account Configuration screen to change the NR2101's system password and configure the
web configurator's inactive time
• Use the About screen to view the detailed information of software and firmware on the
NR2101(Section 12.4 on page
• Use the Factory Reset screen to reset your device settings back to the factory default
12.5 on page
• Use the Logout screen to log out of the Web Configurator

12.2 Firmware Upgrade

This screen allows you to upload new firmware to your NR2101. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your NR2101's
performance.
Only use firmware for your device's specific model.
To access this screen, click Firmware Upgrade. This screen displays the current firmware version and
status of the NR2101. Click Start Firmware Upgrade to begin the upload process.
The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot.
Firmware Over the Air (FOTA) allows for timely and automatic firmware upgrades. You can click Start
Firmware Upgrade and see if any update is available.
Do NOT turn off the NR2101 while firmware upload is in progress!
(Section 12.3 on page
92).
93).
NR2101 User's Guide
C
H A P T E R

Maintenance

91).
(Section 12.6 on page
90
12
(Section 12.2 on page 90).
mode(Section
93).