TP-Link HC2220-G1u User Manual page 11

Chapter 2
System Status LED is solid green and Wireless LED is flashing green.
6. Connect your computer to the Controller.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the computer to the LAN port of
the Controller using an Ethernet cable.
• Method 2: Wireless
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the Controller.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
Connect automatically
• Method 3: Use the Sync button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your Controller by this method.
Note:
• WPS is not supported by iOS devices.
• The WPS function cannot be configured if the wireless function of the Controller is disabled. Also, the WPS
function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled
and is configured with the appropriate encryption before configuring the WPS.
Ethernet cable
<
OR
Connect
Connect the Hardware
Smart Device
Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Other...
8