Create Multi-Ssid Networks - TP-Link HC2220-G1u User Manual

Chapter 9
3. Take a note of the current
get a new PIN.
4. Enter the PIN on the client device. (The default PIN is also printed on the label of the
Controller.)
5. The Sync LED flashes for about 2 minutes during the WPS process.
6. When the Sync LED is on, the client device has successfully connected to the
router.
Note:
1. The WPS LED on the router will light on for five minutes if the device has been successfully added to the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring WPS.
9. 3. 3.

Create Multi-SSID Networks

Your Controller supports additional up to three multi-SSID wireless networks for client
access. You can specify the access and security options to ensure network security
and privacy according to your situation.
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to Settings >
3. Select the MSSID1 (2
Router's PIN. You can also click the
Wireless > Multi-SSID.
or 3) Enable check box to create the corresponding network.
Customize Your Network
Generate button to
56