Table of Contents
Advertisement
Chapter 9
IP address conflicts with another device in your local network or your network requires
a specific IP subnet, you can change it.
Follow the steps below to change your IP address.
1. Visit
http://tplinkwifi.net,
2. Go to
Settings
>
3. Select
IPv4
and click the edit icon in the
4. Enter a new
IP Address
5. Select the
Subnet Mask
the IP address identifies the local IP subnet.
6. Keep the rest settings as default.
7. Click
OK
to make the settings effective.
9. 4. 2.
Use the Router as a DHCP Server
You can configure your Controller to act as a DHCP server to assign IP addresses to
its clients. To use the DHCP server function of the Controller, you must configure all
computers on the LAN to obtain an IP Address automatically.
Follow the steps below to configure DHCP server.
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to
Settings
>
3. Select
IPv4
and click the edit icon in the
and log in with the password you set for the Controller.
Advanced Settings
appropriate to your needs.
from the drop-down list. The subnet mask together with
Advanced Settings
>
DHCP Server
Modify
column.
>
DHCP Server.
Modify
column.
Customize Your Network
58
Advertisement
Table of Contents
