Table of Contents
Advertisement
Chapter 10
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
3. Go to
Settings
>
System Tools
4. Focus on the
Controller Information
matches with the
5. Locate the
Firmware Upgrade
firmware file, and click Upgrade.
6. Wait a few minutes for the upgrading and rebooting.
Note: We recommend that your Controller and the Satellites run on the same firmware. You can check the firmware
versions of the Satellites in the
10. 4. Back Up and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the Controller to a
previous settings by the backup file when needed. Moreover, you can erase the current
settings and reset the router to its default factory settings.
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to
Settings
>
To back up configuration settings:
Click
Backup
to save a copy of the current settings to your local computer. A "conf.
bin" file will be stored to your computer.
>
Firmware
section. Make sure the downloaded firmware file
Hardware
Version.
section. Click
Satellite Version List
table.
System Tools
>
Backup &
Upgrade.
Browse
to load the downloaded new
Restore.
Manage Your Controller
67
Advertisement
Table of Contents
