Table of Contents
Advertisement
Chapter 10
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to
Settings
>
section.
3. Enable
Remote Management
HTTPS connection. Keep the
4. Set the client device allowed for remote management. Select
devices to manage the Controller. If you just want to allow a specific device to
manage the Controller, select
MAC address of the remote device.
5. Click Save.
All devices or the specific device on the internet can log in to your controller using
the address displayed on the
router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
to continue. To avoid this warning, you can download and install the certificate on the Controller's web management page at
Settings
>
System Tools
> Administration.
2. The router's WAN IP is usually a dynamic IP. Please refer to
the router through a domain name.
System Tools
> Administration, and locate the
and
Port
as the default setting.
Only the Following IP/MAC Address
Manage This Router via the Address
Remote Management via HTTPS
Set Up a Dynamic DNS Service Account
Manage Your Controller
Remote Management
to allow for
All
to allow all remote
and enter the IP/
field to manage the
Trust
(or a similar option)
if you want to log in to
70
Advertisement
Table of Contents
