Table of Contents
Advertisement
Chapter 9
4. Enter a new
Network Name (SSID)
Don't select
Hide SSID
Wi-Fi access.
5. Select the
Security
(Recommended)
•
See each other:
want to allow the wireless clients on your multi-SSID network to communicate
with each other via methods such as network neighbors and Ping.
•
Access my local network:
check box if you want to allow the wireless clients on your multi-SSID network
to communicate with the devices connected to your router's LAN ports or main
network via methods such as network neighbors and Ping.
6. Repeat Step 3 to 5 to set other two wireless networks if needed, and click
make the settings effective.
9. 4.
Change LAN Settings
9. 4. 1.
Change the LAN IP Address
The Controller is preset with a default LAN IP 192.168.23.1, which you can use to log
in to its web management page, and three guest LAN IP. The LAN IP address together
with the Subnet Mask also defines the subnet that the connected devices are on. If the
or use the default name, this field is case sensitive.
unless you want your guests to manually input the SSID for
option for the multi-SSID network,
is recommended, and you can set a password for the network.
select the
Allow guests to see each other
select the
Allow guests to access my local network
Customize Your Network
WPA/WPA2 Personal
check box if you
Save
to
57
Advertisement
Table of Contents
