Table of Contents
Advertisement
Chapter 4
4. 1.
Use Quick Setup Wizard
The Quick Setup wizard will guide you to set up your Controller.
You can refer to the instructions below to set up or modify the internet settings of your
Controller.
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Click
Quick Setup
and then click Next.
•
Internet Connection Type:
the corresponding information (if required) provided by your ISP.
Three connection types are supported:
•
6to4 Tunnel Enable:
•
IPv6:
Enable IPv6 internet connection and set up the basic configuration, or
disable the IPv6 connection. Refer to
advanced setup.
Note: 6to4 tunnel and IPv6 cannot be enabled at the same time.
3. Customize your wireless network name (SSID) and the password. You can keep the
default settings or change them to a new one, both fields are case-sensitive, and
then click
Next
to get a brief summary of your internet setup.
on the top of the page and configure the basic internet connection,
Select your internet connection type and enter
Enable or disable the 6to4 tunnel function.
Set Up Internet Connection
Dynamic
IP,
PPPoE
Set Up an IPv6 Internet Connection
and
Static
IP.
for
14
Advertisement
Table of Contents
