Buttons And Ports - TP-Link HC2220-G1u User Manual

Chapter 1
LED Explanation
Name
(Wireless)
(Sync/WPS)
1. 2. 2.

Buttons and Ports

1
Status Indication
The wireless function is enabled, and the device is in the
Flashing Green
factory default state.
For Controller, the wireless function is enabled.
Solid Green
For Satellite, the wireless connection between Controller
and Satellite is successful, and the signal is strong.
For Satellite, the wireless connection between Controller
Solid Orange
and Satellite is successful, but the signal is weak.
For Satellite, the wireless connection between Controller
Off
and Satellite failed.
A wireless device is trying to connect to the network via
Flashing Green
WPS. This process may take up to 2 minutes.
A Satellite is trying to connect to the Controller via
synchronization. This process may take up to 2 minutes.
Solid Green After successful connection, the LED will turn off. If the
synchronization fails, the LED will flash for about 10 seconds
and then turn off.
No WPS/Sync in process or WPS/Sync process has
Off
completed.
Sync
2
3
4
5
6
Get to Know Your Devices
7
4