Set Up An Ipv6 Internet Connection - TP-Link HC2220-G1u User Manual

Chapter 4
Note: If you have changed the preset wireless network name (SSID) and wireless password during the Quick
Setup process, all your wireless devices must use the new SSID and password to connect to the your network.
4. Click Finish to complete the Quick Setup process. You can refer to
Connectivity to test your Internet connection
4. 2.

Set Up an IPv6 Internet Connection

If your ISP provides IPv6 connection and some detailed IPv6 parameters, you can
manually set up an IPv6 connection.
If your ISP provides an IPv4-only connection or IPv6 tunnel service, you can run the
Quick Setup to enable
Follow the steps below to set up an IPv6 connection:
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to Settings > Advanced Settings
3. Select your WAN Interface Name
icon.
4. Scroll down the page to enable IPv6, and configure the IPv6 parameters.
6to4 Tunnel for permitting IPv6
> Internet.
(Status
Set Up Internet Connection
connection.
should be Connected) and click the
Test the Network
(Edit)
15