Gateway Solo 5100 Maintaining & Troubleshooting page 84

ScanDisk
Sound
Connecting to the Internet
84 Maintaining and Troubleshooting Your Solo Notebook
Answer:
Type your first name in the
Password box and click
Click again.
OK
Question:
When I started my notebook, it ran ScanDisk? What's happening?
Answer:
The notebook may have been disconnected from power, had its power
interrupted, or was improperly shut down. Windows 95 automatically runs
Scan Disk when it senses that the notebook was improperly shut down. This
is usually a good thing because ScanDisk fixes any errors on your notebook's
hard disk drive and minimizes data loss.
Question:
I started my new notebook, and I'm not getting any sound from my speakers.
What can I do?
Answer:
If you are using external speakers, check your speaker connections, making
sure the connectors are in the correct ports. Make sure the volume is turned
up for the speakers (using the volume wheel) and in Windows 95. Click
Speaker icon in the lower right corner of the screen and drag the volume
slider up if necessary. Also make sure that the mute box is not checked.
Question:
How do I connect to my Internet provider?
Answer:
To get access to the Internet, you need an Internet Service Provider (ISP). It
may be a service like AOL, CompuServe, or the Microsoft Network, or a
local company. You already have the basic software needed to browse, but the
ISP actually connects you.
User Name box. Don't type anything in the
OK . Windows 95 asks you to confirm your password.