Gateway Solo 5100 Maintaining & Troubleshooting page 37

Windows 95 EZ Pad Plus (touchpad) drivers
Use the following instructions to install the Windows 95 touchpad driver that
supports your touchpad. If the Solo System CD shipped with your system, you may
use it to install the driver instead of installing the drivers from diskette.
Installing the touchpad Driver
1. If the floppy drive module is not already installed, shut down the system and
install the floppy drive. Restart Windows.
2. Click ,
Start Settings
3. Select the General
Changing the mouse device driver
4. Insert the touchpad driver disk in drive A:\ then click
5. Make sure the path is directed to the a:\ directory in the
box. Click
Files From
6. Select the
Hagiwara Point Pad
7. The files will copy to the hard drive. Click
, . Double-click
Control Panel
tab. Click Change .
in the
OK Install From Disk
driver from the
Close
icon.
Mouse
Have Disk... .
Copy Manufacturers
dialog box.
list. Click .
Models OK
.
Chapter 4: Installing Drivers and Related Software 37