Gateway Solo 5100 Maintaining & Troubleshooting page 16

16 Maintaining and Troubleshooting Your Solo Notebook
Use the information displayed at the top of the screen to answer the onscreen
questions. Key information you need to know is the Partition Number,
Partition Type, and the Volume Label on your hard drive.
10. Once you have deleted each of the logical drives or partitions, you're ready to
create new partitions. Press <Esc> to return to FDISK Options menu.
Continue to the next section "Creating partitions on the hard drive."
Creating partitions on the hard drive
1. If you have already exited the FDISK utility, then follow steps one through
five of "Deleting partitions on the hard drive" on page 14 to restart it.
2. Select option [1], Create DOS Partition or Logical DOS Drive
Options menu and press <Enter>.
3. Next choose from options 1 through 3 to create the type of partition you want.
(It's likely you will want to create the same type of partition(s) that existed
originally on your system. Refer to the information you noted in Step 6 of
"Deleting partitions on the hard drive." to determine the original hard drive
settings).
.
Create DOS Partition or Logical DOS Drive menu
from the FDISK