Gateway Solo 5100 Maintaining & Troubleshooting page 20

20 Maintaining and Troubleshooting Your Solo Notebook
Swapping to the CD-ROM module
1. Insert the CD-ROM module and restart the system.
2. The next screen message tells you that you are about to install an operating
system. Insert the Windows 95 CD-ROM and press <F1> to continue.
3. Press <Esc> when you are asked if you want to continue or quit Setup.
Removing the config.sys and autoexec.bat files
1. At the DOS prompt type:
del config.sys
then press <Enter>
2. Type:
del autoexec.bat
then press <Enter>.
Copying .cab files to the hard drive
1. Type:
md win95
then press <Enter>
2. Type:
e:
(where e: is assumed to be your CD-ROM drive)
then press <Enter>
3. Type:
copy e:\win95\*.* c:\win95
press <Enter>
4. When the files are finished copying,