Installing Cd-Rom Drivers - Gateway Solo 5100 Maintaining & Troubleshooting

Installing CD-ROM drivers

To install other drivers and software, it's important to first get the CD-ROM driver
installed so you can use the CD-ROM drive. If you have just reinstalled Windows
NT or Windows 95, the drivers are installed along with the operating system.
If, however, you are having difficulty getting the CD-ROM drive to work and have
not installed a new operating system, then use the following instructions to install
the CD-ROM driver. Once the CD-ROM drive is accessible by the computer, you
can move on with other installation processes.
Installing the CD-ROM driver
1. Place the Solo Boot Diskette in the diskette drive.
2. Start the notebook or restart the system if you already have the power on. If
the power button is configured for Suspend/Resume, then press and hold the
power button for about four seconds to restart the system. The Main menu
appears.
3. Use the arrow key to highlight the
then press <Enter>. An information screen appears.
Solo Boot disk Main menu options. Installing CD-ROM drivers.
Install CD-ROM Drivers On Your Hard Drive ,
Chapter 4: Installing Drivers and Related Software 31