Canceling Printing; Using The Pause/Release Button - Epson WorkForce AL-C500 Series User Manual

2. Press the r Right button three times. The printer prints a configuration status sheet.
3. Confirm that the information about the installed options is correct. If the options are installed
correctly, they appear under Hardware Configuration. If the options are not listed, try reinstalling
them.
Note:
❏ If the configuration status sheet does not list your installed options correctly, make sure that they are
securely connected to the printer.
❏ If you are unable to get the printer to print a correct configuration status sheet, contact your dealer.
❏ Print the configuration status sheet on A4 size paper.

Canceling Printing

You can cancel printing from your computer by using the printer driver.
To cancel a print job before it is sent from your computer, see "Canceling Printing" on page 180.

Using the Pause/Release button

The W Pause/Cancel button on your printer is the quickest and easiest way to cancel printing.
Pressing this button cancels the currently printing job or the specified print job in the printer's
memory.
Follow the steps below to cancel the job.
1. Press the W Pause/Cancel button.
2. Press the d Down or u Up button to select the job that you want to cancel, then press the OK
button.
AL-C500 Series User's Guide
Using the Control Panel 107