Epson WorkForce AL-C500 Series User Manual page 71

AL-C500 Series User's Guide
This setting determines whether the MP tray has the highest or lowest priority when Auto is selected
as the Paper Source setting in the printer driver. When Normal is selected as the MP Mode, the MP tray
has the highest priority as the paper source. If you select Last, the MP tray has the lowest priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether duplex printing starts from the front or back of the page.
Offset Stacking
Specifies whether or not to offset the position of each set of copies.
Staple
Specifies whether or not to staple each set of copies.
Skip Blank Page
Enables you to skip blank pages when printing. This setting is available when you print in the ESC/
Page, ESCP2, FX, or I239X mode.
Auto Eject Page
Specifies whether or not to eject paper when the limit specified in the Time Out setting is reached. The
default is Off, which means paper is not ejected when the time-out limit is reached.
Size Ignore
Using the Control Panel 71