Epson WorkForce AL-C500 Series User Manual page 104

Writing ROM P
This message indicates that a ROM module in the slot is being written. Please wait until this message
disappears.
Wrong Fuser
An inappropriate fuser unit is installed. Install only the fuser unit listed in "Maintenance Parts" on
page 28.
!
Caution:
If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must
touch one of these areas, turn off the printer and wait 30 minutes to allow the heat to subside before
doing so.
Wrong Password
No print jobs have been saved with the password you entered.
Wrong Photocon uuuu
An inappropriate photoconductor unit is installed. Install only the photoconductor unit listed in
"Consumable Products" on page 27.
See "Replacing Consumable Products/Maintenance Parts" on page 146 for instructions on replacing
the photoconductor unit. (The letters C, M, Y, or K appear in place of uuuu and indicate the colors
Cyan, Magenta, Yellow, and Black respectively.)
Wrong Toner Cartridge uuuu
An inappropriate toner cartridge is installed. Install only the toner cartridge listed in "Consumable
Products" on page 27.
See "Replacing Consumable Products/Maintenance Parts" on page 146 for instructions on replacing
the toner cartridge. (The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan,
Magenta, Yellow, and Black respectively.)
Wrong Transfer Unit
An inappropriate transfer unit is installed. Install only the transfer unit listed in "Maintenance Parts"
on page 28.
AL-C500 Series User's Guide
Using the Control Panel 104