Password Config Menu; Energy Saver Menu - Epson WorkForce AL-C500 Series User Manual

Password Config Menu

Item
*
Password Config
Limitation
*
The default password is blank. You can enter up to 20 characters for the password.
Password Config
Changes the password. Enter the old password first and then enter the new password twice.
To enter the password, press the d Down or u Up button to select the character and press the r Right
button to determine the character. After all characters are determined, press the OK button.
Note:
If you forget your password, contact your dealer. Note that when the password is initialized, the settings
and data stored on the printer are deleted. Depending on your environment, settings, such as network
connection settings, may need to be done again. We recommend making a note or backup of the
necessary data and setting information.
Limitation
Changes the restriction range. When Interface is selected, the password is required to change the
settings in the USB and Network menus. When Config is selected, the password is required to enter
Quick Print JobMenu or ConfidentialJobMenu, or to change the settings in all menus. When
All is selected, the password is required to enter Quick Print JobMenu or
ConfidentialJobMenu, or to change the settings and to perform the items in all menus. Before
changing the setting, you have to enter the password set in the Password Config setting.

Energy Saver Menu

Item
Preheat Mode
Time to Preheat
Time to Sleep
*1 *2
Deep Sleep Mode
Settings (default in bold)
-
Disable, Interface, Config, All
Settings (default in bold)
Off, On
1Min, 3Min, 5Min, 15Min, 30Min, 60Min, 120Min, 180Min
1Min, 3Min, 5Min, 15Min, 30Min, 60Min, 120Min, 180Min, 240Min
On, Off
AL-C500 Series User's Guide
Using the Control Panel 87