System Page; Network - Atlona JunoX 451 HDBT Manual

The Web GUI

System page

Network

IP Mode
Click this toggle to set the IP mode of the AT-JUNO-451-HDBT. The default setting is DHCP. Available settings:
STATIC IP, DHCP.
IP
Enter the IP address of the AT-JUNO-451-HDBT in this field. This field will only be available if IP Mode is set to
STATIC IP. The default IP address is 192.168.1.254.
Netmask
Enter the subnet mask in this field. This field will only be available if IP Mode is set to STATIC IP.
Gateway
Enter the gateway (router) address in this field. This field will only be available if IP Mode is set to STATIC IP.
Telnet Port
Enter the Telnet listening port in this field.
Telnet Login Mode
Click this toggle to set the login mode to either ON or OFF. If this feature is set to ON, then the AT-JUNO-451-HDBT
will prompt for both the username and password at the start of a Telnet session. Use the same credentials as the
web GUI.
Telnet Timeout
Click this drop-down list to select the timeout interval, in seconds, before the Telnet connection is automatically
closed after no activity. Range: 1 to 3600 (seconds).
Broadcast
By default, broadcast mode is set to ON. When set to ON, any system changes will be announced over TCP/IP
connections. To separate control between the web GUI and Telnet, set this feature to OFF. Read queries, such as
IPCFG and Type commands, are not announced and will only return information to the requester.
AT-JUNO-451-HDBT 37