System Page - Atlona OMEGA AT-OME-ST31 Manuals

The Web GUI

System page

The System page is divided into two sections: Network and System. The Network section allows configuration
of the IP settings of the AT-OME-ST31. The System section provides controls for resetting the AT-OME-ST31 to
factory-default settings and updating the firmware.
IP Mode
Click this toggle to set the AT-OME-ST31 to DHCP or static mode. By default, the AT-OME-ST31 is in DHCP mode.
IP
Enter the IP address of the AT-OME-ST31 in this field. This field will only be available when the IP Mode is set to
Static. The default static IP address is 192.168.1.254.
Netmask
Enter the subnet mask of the AT-OME-ST31 in this field. This field will only be available when the IP Mode is set to
Static.
Save
Click this button to save all changes in the Network group.
Gateway
Enter the gateway (router) address in this field. This field will only be available when the IP Mode is set to Static.
Telnet Port
Enter the Telnet port in this field. Telnet uses a default port number of 23.
Telnet Login Mode
Click this toggle to set the Telnet Login Mode to ON or OFF.
Telnet Timeout
Click this drop-down list to select the timeout interval,
in seconds.
AT-OME-ST31 38