Faxes Are Sent At The Wrong Size; Received Fax Quality Is Poor; Received Faxes Are Not Printed - Epson WF-6590DWF User Manual

User's Guide
❏ Enable the ECM setting on the control panel.
Related Information
"Fax Mode" on page 27
&
"Fax Settings" on page 35
&
"Cleaning the Scanner Glass" on page 145
&
"Cleaning the ADF" on page 143
&

Faxes Are Sent at the Wrong Size

❏ When sending a fax using the scanner glass, place the original correctly aligning its corner with the origin mark.
Select your original size on the control panel.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the scanning area may
extend to include the dust or stains, resulting in the wrong scanning position or small images.
Related Information
"Fax Mode" on page 27
&
"Placing Originals" on page 52
&
"Cleaning the Scanner Glass" on page 145
&

Received Fax Quality Is Poor

❏ Enable the ECM setting on the control panel.
❏ Contact the sender and ask them to send using a higher quality mode.
❏ Reprint the received fax. Select Job History from Status Menu to reprint the fax.
Related Information
"Fax Settings" on page 35
&
"Checking the Fax Job History" on page 120
&

Received Faxes Are Not Printed

❏ If an error has occurred on the printer, such as a paper jam, the printer cannot print received faxes. Check the
printer.
❏ If the printer has been set to save received faxes in the inbox, the received faxes are not automatically printed.
Check the Fax Output setting.
Related Information
"Checking the Printer Status" on page 161
&
"Removing Jammed Paper" on page 168
&
"Replacing Ink Cartridges" on page 124
&
"Saving Received Faxes in the Inbox" on page 113
&
Solving Problems
193