Epson WF-6590DWF User Manual page 157

User's Guide
❏ Windows 7/Windows Server 2008 R2
Click the start button, select Control Panel > View devices and printers in Hardware and Sound, and then
click Add a Printer.
❏ Windows Vista/Windows Server 2008
Click the start button, select Control Panel > Printers in Hardware and Sound, and then click Add a
Printer.
❏ Windows XP/Windows Server 2003 R2/Windows Server 2003
Click the start button, select Control Panel > Printers and Other Hardware > Printers and Faxes > Add a
Printer, and then click Next.
5. Add a local printer.
❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012
Click The printer that I want isn't listed, select Add a local printer or network printer with manual
settings, and then click Next.
❏ Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008
Click Add a local printer.
❏ Windows XP/Windows Server 2003 R2/Windows Server 2003
Select Local printer attached to this computer, clear Automatically detect and install my Plug and Play
printer, and then click Next.
6. Select Use an existing port, select USB001 (Virtual printer port for USB), and then click Next.
7. Click Have Disk, specify the "eppsnt.inf" file that is on the software disc or that you have downloaded from the
website, and then click OK.
8. Select your printer, and then click Next.
9. Follow the on-screen instructions for the rest of the installation.
Installing a PostScript Printer Driver Using Network Interface - Windows
1. Select Setup > Network Status > Wired LAN/Wi-Fi Status on the control panel, and then confirm the IP
address.
2. Turn off all virus protection applications.
3. Turn on the printer.
4. Insert the software disc that came with the printer into the computer, and download the "Driver/PostScript/
eppsnt.inf " file.
Note:
If your computer does not have a CD/DVD drive, download the printer driver from the Epson support website.
http://www.epson.eu/Support
http://support.epson.net/
Applications and Network Service Information
(Europe)
(outside Europe)
157