Table of Contents
Advertisement
Safety function instruction
This projector provides Closed caption，Key lock and Pin code lock ensure the
projector's operation safety. only when users enter the correct password can you open
your projector when you has set up the three security fea tures.You won't start the
projector without password. in case of the above issues， please reset such three
security features according to the following reset procedure， and then re-check.
Function
Closed caption
PIN code lock
Logo PIN code lock
If forget all password, thus please following the steps to reset the PIN lock or Logo PIN lock:
1. Un-plug the projector
2. Press
and
(Power) button at same time then plug on AC power cord.
3. The unit will be reseted to defult password: 111
standby mode instruction
The projector has two kinds of standby mode， namely Eco.mode and the normal
mode. in the two mode，the follow ing functions will be limited as shown in the
table. Please switch to standby mode on the setting menu.
Normal mode......It can still charge the projector， even if turned off it.
Eco. mode ...........select Eco. mode without network.
function will work failure after you turn
And the network
projector
once you select the Eco. mode， some function will be limited.
Limited functions in standby mode
Function
Serial control
Network
Monitor output
Audio output
Auto startup
* 1 :only be effective when plugged into power.
* 2 :only effective when plugged into power with the special software.
Description
Set up it on the top panel or remote controller.
select the Closed caption function will make you
unable to power on your projector .
Initial setup: Closed caption off
Prevent unauthorized personnel from
operating the projector.
initial Password: 111
Prevent unauthorized personnel from changing the Logo.
initial Password: 111
off the
Eco. mode
Normal mode
v
1
*
--
--
--
v
v
1
*
--
--
--
v
14
Advertisement
Table of Contents
