Appendix-Rs232 Control Commands - Eiki EK-110U Service Manual

Appendix
Serial Control
2.Basic commands
Distinguish the letter case, and enter Each command ends with [CR] (enter) .
Command Option
C00 POWER ON
C01 POWER OFF(Shut down Immediately ) C33
C02 POWER OFF
C36 HDMI1
C37 HDMI2（MHL）
C05 VGA IN 1
C06 VGA IN 2
2.1 POWER ON command
"C00"[CR]
Command
Power ON action
If the projector already in "Power ON" action, thus no need any command
Details
During Power on countdown send "C00" command can stop the countdonw action.
Receive
Return Successfully
Receive
Value
unsuccessfully
2.2 POWER OFF command（Shut down Immediately ）
"C01"[CR]
Command
Power OFF action
Send this command to shut down when you are in the power-on mode
Details
Receive
Return Successfully
Value Receive
unsuccessfully
2.3 POWER OFF command
"C02"[CR]
Command
Power OFF action
Send this command to pop up [POWER OFF] dialog box when you
Details
are in the power-on mode,then send this command once again to
power on.
Return Receive
Value Successfully
Receive
unsuccessfully
Note: [ACK] "CR" is the return value for receiving valid commands.
Command
C07
C34
C15
C16
C17
[ACK]［CR］
"？" [CR]
[ACK]［CR］
"？" [CR]
[ACK]［CR］
"？" [CR]
Option
Video
Component
S-Video
NETWORK
MEMORY VIEWER
USB DISPLAY
38