Safety Instruction - Eiki EK-110U Service Manual

Lcd multi-media projector
Hide thumbs Also See for EK-110U:
Table of Contents

Advertisement

Safety Instructions
Please read this manual completely before installing
and operating the projector.
The projector provides many convenient features
and functions. Proper operation may enable you to
fully utilize the features and keep it in good condition.
Otherwise, it will not only shorten the service life of
the unit, but also may cause malfunction, a fire, or
other accidents.
If your projector cannot work properly, please read
this manual again, check the operating methods and
cable connection, and try the solutions in the part of
Troubleshooting. If the problem still exists, contact the
dealer or the service center.
The
lamp of the projector is a wearing part.The
luminance may decrease after a period of operation
and be weaker than that of a new
normal. Please strictly follow the steps in Turnung on
the unit and Turning off the unit to turn on/off the
projector, and the requirements in Maintaining and
cleaning the projector to service and clean the
projector regular. Otherwise the high temperature
residual heat may not radiate, greatly shorten the
service life of the projector and lamp,or even danage
them within a short period.
Caution
ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
N O T R E M O V E C O V E R ( O R B AC K ) . N O USER
SERVICEABLE
PARTS
REPLACEMENT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS
UNIT.
THIS
SYMBOL INDICATES
A R E
I M P O R TA N T O P E R AT I N G
MAINTENANCE
USER'S MANUAL WITH THIS UNIT.
FOR EU USERS
The symbol mark and recycling systems described below
apply to EU countries and do not apply to countries in
other areas of the world.
Your product is designed and manufactured with high
quality materials and components which can be recycled
and/or reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end of
life, should be disposed of separately from your
household waste.
Note:
If a chemical symbol is printed beneath the symbol mark,
this chemical symbol means that the battery or accumulator
contains a heavy metal at a certain concentration. This will
be indicated as follows: Hg: mercury, Cd: cadmium, Pb:
lead In the European Union there are separate collection
systems for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please help us to conserve the environment
we live in!
lamp. This is
INSIDE
EXCEPT LAMP
THAT THERE
A N D
INSTRUCTIONS
IN THE
Safety
precautions
Caution: ● The projector must be grounded.
● Do not expose the projector to raindrops
or high humidity to avoid a fire or
electric shock.
- This projector produces intense light from the
projection lens. Avoid staring directly into the lens,
otherwise eye damage could be caused.
Be especially careful that children do not
stare directly into the beam.
- Place the projector in a proper position.
Otherwise it may result in fire hazard
- Leave an appropriate space from the top, sides,
and back of the shell in order to ventilate and
cool down the projector. The figures below
indicate the minimum distance to be left. It must
be satisfied if the projector is placed in sealed
environment like a cabinet.
- Do not cover the vent of the projector. Poor
radiation may shorten the service life or
even cause dangers.
- Remove the AC power plug if the projector is
not to be used for a long time.
- Do not project the same image for a long time;
otherwise, a residual image may appear on
the LCD panel due to its characteristic.
Caution:
Do not set the projector in greasy, wet, or
smoky conditions such as in a kitchen, to
prevent a malfunction or accident. If the
projector comes
in contact with oil or chemicals, it may
become deteriorated.
Read and keep this manual for future reference.
The mains plug/appliance coupler is used as
disconnect device, the disconnect device shall
remain readily operable.
Caution:
Contains mercury
For more information on safe handling
procedures, the measures to be taken in case of
accidental breakage and safe disposal options
visit: ec.gc.ca/mercure-mercury/
Dispose of or recycle in accordance with applicable
laws.
3

Advertisement

Table of Contents
loading

Table of Contents