3. STACK menu settings
Set the Intellectual Stack operation using the STACK menu.
NOTE
• If you are using Simple Stack without RS-232C connection, skip this
chapter.
• If you do not need to change the settings made during the installation
explained prior to this chapter, go to
• Read
3.7 Important information for Intellectual Stack
3.1 Displaying STACK menu
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
(Operating Guide
setting for Intellectual Stack operation starts from this menu.
NOTE
• Check that the following settings are made on both projectors.
Otherwise, STACK menu on the projectors cannot be operated. ( 5 )
- STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
- STACK LOCK in SECURITY menu: OFF ( 5 )
Instant Stack Guide
→
OPTION
menu) The
→
SETUP
menu)
→
OPTION
menu)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
3.3 Selecting lamp operation
13
mode. ( 15 )
carefully. ( 20 )
020-000489-02 Rev. 1 (06-2012)