Target Board for RX65N
7.
Handling Precautions
7.1
Board Thickness
Please be extra careful when handling the "Target Board for RX65N " as the board is thin (0.8 mm).
7.2
Additional Load
When adding loads by USB power supply,
When adding loads by external power supply, the maximum operational current is 500 mA under any
operating voltage.
7.3
Substrate Remodelling
Any modification of the board (including changing the cut pattern) shall be conducted on a user's own
responsibility.
7.4
Target Board connection limit
It is not possible to connect to multiple Target Boards from the same host PC.
R20UT4167EJ0101 Rev.1.01
Jul 20, 2018
the maximum operational current is 300 mA at 3.3 V operation.
7. Handling Precautions
Page 18 of 24