Handling Precautions; Board Thickness; Additional Load; Substrate Remodelling - Renesas RX130 Series User Manual

Target Board for RX130
7.

Handling Precautions

Board Thickness

7.1
Please be extra careful when handling the Target Board for RX130 as the board is thin (0.8 mm).
7.2

Additional Load

When adding loads by USB power supply, the maximum operational current is 300 mA at 3.3 V, current is 100
mA at 5 V operation.
When adding loads by external power supply, the maximum operational current is 500 mA under any
operating voltage.

Substrate Remodelling

7.3
Any modification of the board (including changing the cut pattern) shall be conducted on a user's own
responsibility.

Communication with RFP

7.4
The Target Board for RX130 does not support communication with RFP. Use the IDE to write and read
programs.
R20UT4169EJ0100 Rev.1.00
Oct 13, 2017
7. Handling Precautions
Page 18 of 24